Input utilties
|
| DXFRescuer |
Loads and converts non-standard DXF data from AutoCad® files |
| MCDigitize |
Enters points, lines, and splines from a digitizer |
| Prob2Spl |
Converts 3D (XYZ), 5D (XYZ AB), or 8D (XYZ AB UVW) probe center data into splines. Used for reverse engineering of machine probe position data |
Wireframe geometry
|
| Align |
Aligns notes or labels |
| Asphere |
Creates the geometry for an aspherical lens |
| BoltCircle |
Creates circle of bolt holes |
| BreakCircles |
Breaks full circles into smaller arcs |
| Drawpock |
Draws geometry for a 2D pocket or slot |
| DrillPt |
Draws point entities at the center points of your arcs |
| FindOverlap |
Finds and deletes overlapping entities |
| Fplot |
Plots a mathematical function |
| Gear |
Creates one tooth or all teeth of an involute spur or internal gear |
| Gridpock |
Fills a pocket with points or circles or draws points along its boundary |
| HoleTable |
Creates a table which categorizes, counts, and labels holes or circles |
| PullUp |
Repositions nodes of a parametric spline in positive Z direction |
| Rmnodes |
Removes nodes from splines or NURBS surfaces |
| Sprocket |
Creates the geometry for a sprocket |
| TxtChain |
Creates single lines of text on lines, curves, and other geometric entities |
| Untrim |
Untrims all selected splines and NURBS curves to their original extents |
| WholeSpline |
Converts a trimmed spline into an untrimmed spline of the same shape |
Surfaces and solids
|
| ConsToSpline |
Converts surface curves to parametric splines |
| CoonsSurf |
Creates a surface from a grid of curves, called a Coons surface |
| CreateBoundary |
Creates a 2D or 3D boundary curve around a set of surfaces or around the theoretical machined area for specific tool sizes |
| FlattenSurf |
Produces a planar surface from a 3-dimensional non-planar surface |
| Map |
Maps a surface curve from one surface to another |
| NoHist |
Removes the operations history from a solid and transforms it into a "brick" |
| Rev2Rev |
Converts a surface to a new surface based on a specified number of U/V patches |
| Rev2STL |
Converts a surface to an STL file based on a specified number of U/V patches |
| STLHeal |
Repairs gaps in an STL file |
Toolpath utilities
|
| Arc3D |
Converts linear moves into 2D or 3D arcs |
| Comp3D |
Adds surface compensation vectors to 3-axis surface toolpaths to support machine controls that have 3D tool compensation |
| Rolldie |
Creates toolpaths around a rotary axis |
| SectionNCI |
Converts a single NCI file to a series of smaller ones |
| Swept2R |
Adds roughing passes and a choice of one-way/zig-zag cutting to a swept 2D toolpath |
Tool holders
|
| HolderASCII |
Converts holder libraries between binary format and ASCII text files |
Multi-axis toolpaths
|
| Contain5 |
Contains the shank of a 5-axis tool inside a chained boundary or to a point |
| Floor5ax |
Projects and compensates 5-axis toolpaths along the tool vectors to a set of floor surfaces |
| FloorNCI |
Projects and compensates 5-axis toolpaths from an NCI file to a set of floor surfaces in the current part |
| Focus5ax |
Modifies the tool axis of a 5-axis toolpath so that it points through either a line or a single point |
| Project5 |
Projects a 3-axis toolpath to a set of surfaces and converts the toolpath to a 5-axis toolpath using the surface normal of the contact point as the tool axis vector |
Screen and views
|
| BlankDuplicates |
Locates duplicate entities and blanks them, instead of deleting them |
| Metafile |
Saves the contents of the graphics window to a .EMF file |
| Trimetric |
Changes the Gview to a trimetric view and adds it to the named view list |
Support utilities
|
| Control Definition Compare |
Compares two control definitions (or their post text) and highlights the differences |
| |
|
| Zip2Go |
Gathers and compresses the open (current) Mastercam part data into a .Z2G file. This file can then be opened and viewed with most zip/unzip programs such as WinZip™. Use Zip2Go when you need to transfer a part file to a technical support contact. |
